Adj Tail Push Rod PRO: TREX 450X/XL

by MICROHELI CO., LTD

Adj Tail Push Rod PRO: TREX 450X/XL photo

Specifications

  • Manufacturer: MICROHELI CO., LTD
  • Includes: -2 x CNC tail push rod ends -2 x miniature threaded rods preassembled -1 x carbon rod (2x220mm) -1 x carbon rod (2x30mm) -Special plastic joint end with brass pin are included to work with HS-50 servo -1 x extra delrin push rod guide -Allen key and set screws included.
  • Requires: -Loctite (#242 is recommended) all screws while assembling the tail pulley case into the heli. -Require a T-REX aluminum linkage ball and plastic ball linkage to attach the aluminum push rod end to servo arms of HS-55 and HS56-HB servos, no additional hardware needed for HS-50 servos.
  • Rigid 2mm carbon rodStylish and solid aluminum ends to provide maxinum secure and tail control performanceAdjustable pushrod length to achieve best mechanical tail rudder settingsAdditional Delrin push rod guide with this set to minimize rod vibration under both low and high tail rotor RPM conditionsAdjustable coupling to allow adjustment of tail push rod length within range of 0.10mm to 10mm.Special plastic joint ends are included to work with HS-50 servoWeight: 2.5g

Similar parts

Comments, stories:
If you have used Adj Tail Push Rod PRO: TREX 450X/XL before, please write several words with your feedback, pros and cons, or whatever you think will be usefull for readers. If you have a question - you can ask it here.

Merziuzi,21/02
eCNeyr https://writemyessayforme.web.fc2.com#write

⇧